Skip to main content

Circularity

 



The circularity symbol is used to describe how close an object should be to a true circle. Sometimes called roundness, circularity is a 2-Dimensional tolerance that controls the overall form of a circle ensuring it is not too oblong, square, or out of round. Roundness is independent of any datum feature and only is always less than the diameter dimensional tolerance of the part. Circularity essentially make a cross section of a cylindrical or round feature and determines if the circle formed in that cross section is round.

Labels:

Comments

Post a Comment

Popular posts from this blog

GD&T basics

GD&T Symbols List Flatness Flatness GD&T Flatness is a common symbol that references how flat a surface is regardless of any other datum’s or features. It comes in useful if a feature is to be defined on a drawing that needs to be uniformly flat without tightening any other dimensions on the drawing. The flatness tolerance references two parallel planes (parallel to the surface that it is called out on) that define a zone where the entire reference surface must lie. Straightness Straightness actually has two very different functions in GD&T depending how it is called out. In its normal form or Surface Straightness, is a tolerance that controls the form of a line somewhere on the surface or the feature. Axis Straightness is a tolerance that controls how much curve is allowed in the part’s axis. This is usually called out with an included call to maximum material condition. Both callouts are very different from ea...
2 comments
Read more

working of breaking system in automobiles

Definition of automobile       brake system Actually, vehicle can be regard as energy conversion device, which transfers the momentum into heat, in other words, which transfers the kinetic energy into thermal energy. The brakes are used to reduce the speed of the vehicle, and the speed of conversion determines the rate of the vehicle slows down.
Post a Comment
Read more

Flux-cored arc welding

          Flux-cored arc welding (FCAW or FCA) is a semi-automatic or automatic arc welding process. FCAW requires a continuously-fed consumable tubular electrode containing a flux and a constant-voltage or, less commonly, a constant-current welding power supply.   An externally supplied shielding gas is sometimes used, but often the flux itself is relied upon to generate the necessary protection from the atmosphere, producing both gaseous protection and liquid slag protecting the weld. The process is widely used in construction because of its high welding speed and it portability.
Post a Comment
Read more